The Ghost Immobiliser
Immobilisers are an effective tool in the fight against vehicle theft. They prevent the vehicle from starting if it isn't equipped with an identification card. They also work well to stop hotwiring and other traditional methods of vehicle theft. Newer methods such as key cloning or relay theft are becoming more common.
The Ghost Immobiliser has been designed to counter these new trends and make your vehicle inaccessible. It doesn't use LED indications, radio signals or key fobs and is silent and discreet.
Easy to install
The Ghost Immobiliser is an innovative device that connects to the CAN data network inside your vehicle to stop key theft and cloning. It is a TASSA approved product and insurance companies have endorsed it. It is virtually undetectable by thieves and operates quietly. It uses buttons in your steering wheel, center console and doors to create an individual pin code that must be entered prior to being able to start your car. You can create up to 20 different sequences to increase security. The system is simple to install and doesn't require any additional wiring or hardware.
To ensure the highest quality outcomes It is recommended that you choose a reputable CAN-immobiliser installer who is specialized in your specific vehicle. Idealy, they should have a workshop close to you where you can go to have your installation completed. They'll also have a variety of tools and materials to help you during the installation process. They will have basic hand tools, multimeters insulation tape, and heat shrink tubing for protecting the connections. A user manual will provide you with instructions for the wiring in your vehicle.
Remove the battery prior to starting the installation to prevent short circuits or airbag deployment. Double-checking the CAN L and H wires is vital since a misidentification could result in a faulty integration of the system. It is also a great idea to label or mark the wires. Finally, use a multimeter to verify that the power source identified has a reliable 12V supply.
Advanced thieves may employ various methods to evade Ghost Immobilisers, including blocking or spoofing. These methods work by amplifying signals sent from the key fob to your vehicle's electronic controller unit. With the help of advanced anti-jamming technology and vigilant monitoring you can safeguard your vehicle from these sophisticated attacks.
Security Improved
A ghost immobiliser provides an additional layer of protection for your car against theft. It uses an PIN code protection system that is activated by pressing buttons on the steering wheel or on your dashboard, making it difficult for thieves to gain access to the device and take your vehicle. The device is designed to be hidden in your vehicle. It doesn't have any lights or other indicators to alert potential burglars to its presence. It communicates directly with the ECU of your car via the data bus. This means that it is not vulnerable to hacking or relay attacks.
It's a great investment for those who have prestige cars, which are at higher risk of theft due to their price and the popularity of their vehicles. Its security features are enhanced to protect against key duplicates, ECU swapping, and other threats to your car's security. Some ghost immobilisers are also connected to apps, which means you can arm or disarm quickly. They can also be equipped with the option of a service/valet mode, which permits you to temporarily disable them while your vehicle is being repaired or serviced.
Another advantage of a ghost immobiliser is that it doesn't require cutting of wire. This is a great option, particularly if you are driving a car that doesn't have built-in immobiliser technology. Some systems may also be equipped to work with an GPS tracking device, which can provide additional security for your vehicle. A GPS tracker may also reduce the cost of insurance. If you decide to purchase a ghost immobiliser make sure it's TASSA-certified and an experienced installer installs the device for you.
Compatibility with all major makes and models
The Ghost Immobiliser has been made to work with all major vehicle models and makes, protecting your prized possessions from theft. It uses buttons in your steering wheel, centre console, or door panels to generate a unique pin code, which must be entered before you can drive your car. The system is secure and undetectable. It is also is covered by a three-year warranty. It is also fully approved by insurance companies. This means you can lower your insurance premiums.
The Ghost system differs from the traditional immobilisers that rely on the key fob to provide ignition control. It connects directly to the engine controller via the CAN bus. This means it is secure from tampering, is nearly impossible to disable or remove and is not targeted by organized car theft groups. The Ghost system can also be linked to an iPhone app to allow remote monitoring and management.
You can design a PIN that is simple to remember, but mathematically unattainable to thieves. You can alter and customize the PIN at anytime to protect your vehicle even if it's located in a parking lot or on the street. ghost immobiliser and tracker can also select a valet or service mode if you need someone who is not driving your car temporarily, for example when it's in the garage for servicing. This is a great way to prevent your car from being stolen by an unscrupulous mechanic. You can opt for the Ghost Call alert to give you more security. It will notify you when your car is moving or has been moved.
Convenience
The ghost immobiliser is a highly effective security system, securing your vehicle against common theft methods like key cloning and relay attacks. It connects to the car's CAN network and preventing communication with the engine ECU. This makes it difficult for thieves to duplicate or hack your car, making the installation of this system a good idea for all drivers.
Once installed, you will need to enter a PIN sequence up to 20 digits long using the buttons on your dashboard or steering wheel in order to start the engine. The system is completely hidden and undetectable to thieves, as it does not emit any radio frequency signals. It can be configured with an PIN code that can be altered by the user, which adds to its security. The system is designed to avoid cutting the circuit, making it nearly impossible to alter.
Certain systems let you communicate directly with the immobiliser via an app on your smartphone, disarming it immediately when you forget your PIN. Some systems even have a valet/service setting that allows you to temporarily to start your car, for instance, if you drop it off at Valet Park or a garage.
The Ghost Immobiliser is also undetectable to thieves as it does not transmit any radio signals, a major advantage over other aftermarket car security systems. It is also easy to use and doesn't require any complicated wiring. It can also be used in conjunction with a dash cam to provide additional security. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system can also be hardwired to ensure optimum performance and durability.
Installation
It is crucial to select the best immobiliser ghost to protect your car from thieves. This device can in preventing theft of your car by blocking the communication between your engine controller unit (ECU) and key fobs. This device blocks thieves from stealing and cloning the signal that allows you to start your vehicle. It also can detect the moment it has been altered with and alert the owner of the vehicle.
The device is simple to install and works with the existing systems of your vehicle. It doesn't require any modifications to the wiring in your vehicle and can be concealed in a hidden area, like under the dashboard. To make sure that the device is properly installed, follow the instructions in the user manual. After installation, it is crucial to test the system. This will ensure the ghost of the immobiliser functions as intended.
You can purchase an Autowatch Ghost 2 immobiliser from an authorized installer and have it installed on your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it harder for thieves to take over the system or bypass it. Installation generally takes between 2 and 3 hours.
When installing the Ghost it is recommended to look up the wiring diagram for the vehicle model you are using. This will allow you to identify the CAN High & the CAN Low wires needed to connect your Ghost to the engine of your vehicle. Check all connections to make sure they're secure and insulated.
Once the installation is complete and you are able to use the Ghost Immobiliser during normal operation. It will turn off the ignition of your vehicle if it is not started with the correct PIN, which you can create yourself. The ghost immobiliser cost can also be set to service/valet mode when you have to hand over your vehicle for servicing or valet parking.